SWITCH LANBERG 24 PORTS GIGABIT ETHERNET RACK 19´´
Brand: LANBERG | Part-Number: RSGE-24 | EAN: 5901969429022 | SKU: P367645

TRANSFER WILL NOT BE AN ISSUE:
SIMPLE AND FUNCTIONAL UNMANAGED SWITCH FROM LANBERG
The switch is an essential active networking device in any Ethernet infrastructure structure using transmission through structural cabling. RSGE-24 is dedicated to all installations: home, business, low-voltage, surveillance, IP, VoIP, cable TV networks.
Its proper housing and included mounting ears allow for installation in server cabinets. The available features allow for versatile use in any configuration, bus topology, and microchip used to ensure Gigabit Ethernet speed.
All this makes the switch dedicated for use in demanding and wide area networks.

EXTEND MODE UP TO 250 METERS
By default, the standard switches ensure that the devices can operate at distances of up to 100 m on a single Ethernet cable. However, sometimes, it turns out that a unique solution beyond the standard is required when developing cabling and network structure due to the extensive core network and complex environment. In the case of surveillance systems, this is quite a common problem, resulting from the too-long distance between the distribution device and the end-device.
Lanberg switches have a feature that enables data transmission (max. 10 Mbps) to 250 m on a single cable section. Just toggle the switch position to ?Extend 250 m? on the housing to ensure the long-distance operation.
The solution has been introduced for surveillance, IP, and access control systems, especially if the power equipment is located outside without the possibility of installing additional network distribution points.

PORT ISOLATION FEATURE - VLAN
VLAN is a function with a wide range of possibilities, from isolating or combining several logical networks within another, larger physical network to separating ports among themselves. This feature is mainly used in configurable switches is rarely found in budget models and even more so in unmanageable solutions.
Lanberg switches have a feature to isolate all standard ports between them (1 ~ 22) while allowing every each of them to transmit only with Uplink ports (23 ~ 24). Just toggle the switch position to ?VLAN? on the housing to ensure port separation.
The manufacturer introduced the solution to ensure effective protection of devices in surveillance, alarm, and access control systems, particularly in places where security is always the top priority.

2 kV ESD PROTECTION
The switch itse

SWITCH LANBERG 24 PORTS GIGABIT ETHERNET RACK 19´´

Lanberg RSGE-24. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. MAC address table: 8000 entries, Switching capacity: 1 Gbit/s. Networking standards: IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x. Rack mounting, Form factor: 1U